rxdart 0.27.0 copy "rxdart: ^0.27.0" to clipboard
rxdart: ^0.27.0 copied to clipboard

Published 3 years ago • verified publisherfluttercommunity.dev• Latest: 0.28.0
outdated
→

Metadata

RxDart is an implementation of the popular reactiveX api for asynchronous programming, leveraging the native Dart Streams api.

More...

0.27.0 #

  • BREAKING: ValueStream
    • Remove ValueStreamExtensions.
    • ValueStream.valueWrapper becomes
      • value.
      • valueOrNull.
      • hasValue.
    • ValueStream.errorAndStackTrace becomes
      • error.
      • errorOrNull.
      • hasError.
      • stackTrace.
  • Add skipLast/SkipLastStreamTransformer (thanks @HannibalKcc).
  • Update scan: change seed to required param.
  • Add StackTrace param to recoveryFn when using OnErrorResumeStreamTransformer/onErrorResume/onErrorReturnWith.
  • Internal refactoring ConnectableStream.

0.26.0 #

  • Stable, null-safe release.
  • Add takeLast (thanks @ThomasKliszowski).
  • Rework for retry/retryWhen:
    • Removed RetryError.
    • retry: emits all errors if retry fails.
    • retryWhen: emits original error, and error from factory if they are not identical.
    • streamFactory now accepts non-nullable StackTrace argument.
  • Update ValueStream.requireValue and ValueStream.requireError: throws actual error or a StateError, instead of throwing "Null check operator used on a null value" error.

0.26.0-nullsafety.1 #

  • Breaking change: ValueStream
    • Add valueWrapper to ValueStream.
    • Change value, hasValue, error and hasError to extension getters.
  • Fixed some API example documentation (thanks @HannibalKcc).
  • throttle/throttleTime have been optimised for performance.
  • Updated Flutter example to work with the latest Flutter stable.

0.26.0-nullsafety.0 #

  • Migrate this package to null safety.
  • Sdk constraints: >=2.12.0-0 <3.0.0 based on beta release guidelines.

0.25.0 #

  • Sync behavior when using publishValueSeeded.
  • ValueStream, ReplayStream: exposes stackTrace along with the error:
    • Change ValueStream.error to ValueStream.errorAndStackTrace.
    • Change ReplayStream.errors to ReplayStream.errorAndStackTraces.
    • Merge Notification.error and Notification.stackTrace into Notification.errorAndStackTrace.
  • Bugfix: debounce/debounceTime unnecessarily kept too many elements in queue.

0.25.0-beta3 #

  • Bugfix: switchMap doesn't close after the last inner Stream closes.
  • Docs: updated URL for "Single-Subscription vs. Broadcast Streams" doc (thanks Aman Gupta).
  • Add FromCallableStream/Rx.fromCallable: allows you to create a Stream from a callable function.
  • Override BehaviorSubject's built-in operators to correct replaying the latest value of BehaviorSubject.
  • Bugfix: Source StreamSubscription doesn't cancel when cancelling refCount, zip, merge, concat StreamSubscription.
  • Forward done event of upstream to ConnectableStream.

0.25.0-beta2 #

  • Internal refactoring Stream Transformers.
  • Fixed RetryStream example documentation.
  • Error thrown from DeferStream factory will now be caught and converted to Stream.error.
  • doOnError now have strong type signature: Stream<T> doOnError(void Function(Object, StackTrace) onError).
  • Updated ForkJoinStream:
    • When any Stream emits an error, listening still continues unless cancelOnError: true on the downstream.
    • Pause and resume Streams properly.
  • Added UsingStream.
  • Updated TimerStream: Pause and resume Timer when pausing and resuming StreamSubscription.

0.25.0-beta #

  • stream transformations on a ValueStream will also return a ValueStream, instead of a standard broadcast Stream
  • throttle can now be both leading and trailing
  • better handling of empty Lists when using operators that accept a List as input
  • error & hasError added to BehaviorSubject
  • various docs updates
  • note that this is a beta release, mainly because the behavior of transform has been adjusted (see first bullet) if all goes well, we'll release a proper 0.25.0 release soon

0.24.1 #

  • Fix for BehaviorSubject, no longer emits null when using addStream and expecting an Error as first event (thanks yuvalr1)
  • min/max have been optimised for performance
  • Further refactors on our Transformers

0.24.0 #

  • Fix throttle no longer outputting the current buffer onDone
  • Adds endWith and endWithMany
  • Fix when using pipe and an Error, Subjects would throw an Exception that couldn't be caught using onError
  • Updates links for docs (thanks @renefloor)
  • Fix links to correct marbles diagram for debounceTime (thanks @wheater)
  • Fix flakiness of withLatestFrom test Streams
  • Update to docs (@wheater)
  • Fix withLatestFrom not pause/resume/cancelling underlying Streams
  • Support sync behavior for Subjects
  • Add addTo extension for StreamSubscription, use it to easily add a subscription to a CompositeSubscription
  • Fix mergeWith and zipWith will return a broadcast Stream, if the source Stream is also broadcast
  • Fix concatWith will return a broadcast Stream, if the source Stream is also broadcast (thanks @jarekb123)
  • Adds pauseAll, resumeAll, ... to CompositeSubscription
  • Additionally, fixes some issues introduced with 0.24.0-dev.1

0.24.0-dev.1 #

  • Breaking: as of this release, we've refactored the way Stream transformers are set up. Previous releases had some incorrect behavior when using certain operators, for example:

    • startWith (startWithMany, startWithError) would incorrectly replay the starting event(s) when using a broadcast Stream at subscription time.

    • doOnX was not always producing the expected results:

      • doOnData did not output correct sequences on streams that were transformed multiple times in sequence.
      • doOnCancel now acts in the same manner onCancel works on regular subscriptions, i.e. it will now be called when all active subscriptions on a Stream are cancelled.
      • doOnListen will now call the first time the Stream is subscribed to, and will only call again after all subscribers have cancelled, before a new subscription starts.

      To properly fix this up, a new way of transforming Streams was introduced.
      Operators as of now use Stream.eventTransformed and we've refactored all operators to implement Sink instead.

  • Adds takeWileInclusive operator (thanks to @hoc081098)

We encourage everyone to give the dev release(s) a spin and report back if anything breaks. If needed, a guide will be written to help migrate from the old behavior to the new behavior in certain common use cases.

Keep in mind that we tend to stick as close as we can to how normal Dart Streams work!

0.23.1 #

  • Fix API doc links in README

0.23.0 #

  • Extension Methods replace Observable class!
  • Please upgrade existing code by using the rxdart_codemod package
  • Remove the Observable class. With extensions, you no longer need to wrap Streams in a [Stream]!
    • Convert all factories to static constructors to aid in discoverability of Stream classes
    • Move all factories to an Rx class.
    • Remove Observable.just, use Stream.value
    • Remove Observable.error, use Stream.error
    • Remove all tests that check base Stream methods
    • Subjects and *Observable classes extend Stream instead of base Observable
    • Rename *Observable to *Stream to reflect the fact they're just Streams.
      • ValueObservable -> ValueStream
      • ReplayObservable -> ReplayStream
      • ConnectableObservable -> ConnectableStream
      • ValueConnectableObservable -> ValueConnectableStream
      • ReplayConnectableObservable -> ReplayConnectableStream
  • All transformation methods removed from Observable class
    • Transformation methods are now Extensions of the Stream class
    • Any Stream can make use of the transformation methods provided by RxDart
    • Observable class remains in place with factory methods to create different types of Streams
    • Removed deprecated ofType method, use whereType instead
    • Deprecated concatMap, use standard Stream asyncExpand.
    • Removed AsObservableFuture, MinFuture, MaxFuture, and WrappedFuture
      • This removes asObservable method in chains
      • Use default asStream method from the base Future class instead.
      • min and max now implemented directly on the Stream class

0.23.0-dev.3 #

  • Fix missing exports:
    • ValueStream
    • ReplayStream
    • ConnectableStream
    • ValueConnectableStream
    • ReplayConnectableStream

0.23.0-dev.2 #

  • Remove the Observable class. With extensions, you no longer need to wrap Streams in a [Stream]!
  • Convert all factories to static constructors to aid in discoverability of Stream classes
  • Move all factories to an Rx class.
  • Remove Observable.just, use Stream.value
  • Remove Observable.error, use Stream.error
  • Remove all tests that check base Stream methods
  • Subjects and *Observable classes extend Stream instead of base Observable
  • Rename *Observable to *Stream to reflect the fact they're just Streams.
    • ValueObservable -> ValueStream
    • ReplayObservable -> ReplayStream
    • ConnectableObservable -> ConnectableStream
    • ValueConnectableObservable -> ValueConnectableStream
    • ReplayConnectableObservable -> ReplayConnectableStream

0.23.0-dev.1 #

  • Feedback on this change appreciated as this is a dev release before 0.23.0 stable!
  • All transformation methods removed from Observable class
    • Transformation methods are now Extensions of the Stream class
    • Any Stream can make use of the transformation methods provided by RxDart
  • Observable class remains in place with factory methods to create different types of Streams
  • Removed deprecated ofType method, use whereType instead
  • Deprecated concatMap, use standard Stream asyncExpand.
  • Removed AsObservableFuture, MinFuture, MaxFuture, and WrappedFuture
    • This removes asObservable method in chains
    • Use default asStream method from the base Future class instead.
    • min and max now implemented directly on the Stream class

0.22.6 #

  • Bugfix: When listening multiple times to aBehaviorSubject that starts with an Error, it emits duplicate events.
  • Linter: public_member_api_docs is now used, we have added extra documentation where required.

0.22.5 #

  • Bugfix: DeferStream created Stream too early
  • Bugfix: TimerStream created Timer too early

0.22.4 #

  • Bugfix: switchMap controller no longer closes prematurely

0.22.3 #

  • Bugfix: whereType failing in Flutter production builds only

0.22.2 #

  • Bugfix: When using a seeded BehaviorSubject and adding an Error, upon listening, the BehaviorSubject emits null instead of the last Error.
  • Bugfix: calling cancel after a switchMap can cause a NoSuchMethodError.
  • Updated Flutter example to match the latest Flutter release
  • Observable.withLatestFrom is now expanded to accept 2 or more Streams thanks to Petrus Nguyễn Thái Học (@hoc081098)!
  • Deprecates ofType in favor of whereType, drop TypeToken.

0.22.1 #

Fixes following issues:

  • Erroneous behavior with scan and BehaviorSubject.
  • Bug where flatMap would cancel inner subscriptions in pause/resume.
  • Updates to make the current "pedantic" analyzer happy.

0.22.0 #

This version includes refactoring for the backpressure operators:

  • Breaking Change: debounce is now split into debounce and debounceTime.
  • Breaking Change: sample is now split into sample and sampleTime.
  • Breaking Change: throttle is now split into throttle and throttleTime.

0.21.0 #

  • Breaking Change: BehaviorSubject now has a separate factory constructor seeded() This allows you to seed this Subject with a null value.
  • Breaking Change: BehaviorSubject will now emit an Error, if the last event was also an Error. Before, when an Error occurred before a listen, the subscriber would not be notified of that Error. To refactor, simply change all occurences of BehaviorSubject(seedValue: value) to BehaviorSubject.seeded(value)
  • Added the groupBy operator
  • Bugix: doOnCancel: will now await the cancel result, if it is a Future.
  • Removed: bufferWithCount, windowWithCount, tween Please use bufferCount and windowCount, tween is removed, because it never was an official Rx spec.
  • Updated Flutter example to work with the latest Flutter stable.

0.20.0 #

  • Breaking Change: bufferCount had buggy behavior when using startBufferEvery (was skip previously) If you were relying on bufferCount with skip greater than 1 before, then you may have noticed erroneous behavior.
  • Breaking Change: repeat is no longer an operator which simply repeats the last emitted event n-times, instead this is now an Observable factory method which takes a StreamFactory and a count parameter. This will cause each repeat cycle to create a fresh Observable sequence.
  • mapTo is a new operator, which works just like map, but instead of taking a mapper Function, it takes a single value where each event is mapped to.
  • Bugfix: switchIfEmpty now correctly calls onDone
  • combineLatest and zip can now take any amount of Streams:
    • combineLatest2-9 & zip2-9 functionality unchanged, but now use a new path for construction.
    • adds combineLatest and zipLatest which allows you to pass through an Iterable<Stream
    • adds combineLatestList / zipList which allows you to take in an Iterable<Stream
    • Constructors are provided by the Stream implementation directly
  • Bugfix: Subjects that are transformed will now correctly return a new Observable where isBroadcast is true (was false before)
  • Remove deprecated operators which were replaced long ago: bufferWithCount, windowWithCount, amb, flatMapLatest

0.19.0 #

  • Breaking Change: Subjects onCancel function now returns void instead of Future to properly comply with the StreamController signature.
  • Bugfix: FlatMap operator properly calls onDone for all cases
  • Connectable Observable: An observable that can be listened to multiple times, and does not begin emitting values until the connect method is called
  • ValueObservable: A new interface that allows you to get the latest value emitted by an Observable.
    • Implemented by BehaviorSubject
    • Convert normal observables into ValueObservables via publishValue or shareValue
  • ReplayObservable: A new interface that allows you to get the values emitted by an Observable.
    • Implemented by ReplaySubject
    • Convert normal observables into ReplayObservables via publishReplay or shareReplay

0.18.1 #

  • Add retryWhen operator. Thanks to Razvan Lung (@long1eu)! This can be used for custom retry logic.

0.18.0 #

  • Breaking Change: remove retype method, deprecated as part of Dart 2.
  • Add flatMapIterable

0.17.0 #

  • Breaking Change: stream property on Observable is now private.
    • Avoids API confusion
    • Simplifies Subject implementation
    • Require folks who are overriding the stream property to use a super constructor instead
  • Adds proper onPause and onResume handling for amb/race, combineLatest, concat, concat_eager, merge and zip
  • Add switchLatest operator
  • Add errors and stacktraces to RetryError class
  • Add onErrorResume and onErrorRetryWith operators. These allow folks to return a specific stream or value depending on the error that occurred.

0.16.7 #

  • Fix new buffer and window implementation for Flutter + Dart 2
  • Subject now implements the Observable interface

0.16.6 #

  • Rework for buffer and window, allow to schedule using a sampler
  • added buffer
  • added bufferFuture
  • added bufferTest
  • added bufferTime
  • added bufferWhen
  • added window
  • added windowFuture
  • added windowTest
  • added windowTime
  • added windowWhen
  • added onCount sampler for buffer and window
  • added onFuture sampler for buffer and window
  • added onTest sampler for buffer and window
  • added onTime sampler for buffer and window
  • added onStream sampler for buffer and window

0.16.5 #

  • Renames amb to race
  • Renames flatMapLatest to switchMap
  • Renames bufferWithCount to bufferCount
  • Renames windowWithCount to windowCount

0.16.4 #

  • Adds bufferTime transformer.
  • Adds windowTime transformer.

0.16.3 #

  • Adds delay transformer.

0.16.2 #

  • Fix added events to sink are not processed correctly by Subjects.

0.16.1 #

  • Fix dematerialize method for Dart 2.

0.16.0+2 #

  • Add value to BehaviorSubject. Allows you to get the latest value emitted by the subject if it exists.
  • Add values to ReplayrSubject. Allows you to get the values stored by the subject if any exists.

0.16.0+1 #

  • Update Changelog

0.16.0 #

  • breaks backwards compatibility, this release only works with Dart SDK >=2.0.0.
  • Removed old cast in favour of the now native Stream cast method.
  • Override retype to return an Observable.

0.15.1 #

  • Add exhaustMap map to inner observable, ignore other values until that observable completes.
  • Improved code to be dartdevc compatible.
  • Add upper SDK version limit in pubspec

0.15.0 #

  • Change debounce to emit the last item of the source stream as soon as the source stream completes.
  • Ensure debounce does not keep open any addition async timers after it has been cancelled.

0.14.0+1 #

  • Change DoStreamTransformer to return a Future on cancel for api compatibility.

0.14.0 #

  • Add PublishSubject (thanks to @pauldemarco)
  • Fix bug with doOnX operators where callbacks were fired too often

0.13.1 #

  • Fix error with FlatMapLatest where it was not properly cancelled in some scenarios
  • Remove additional async methods on Stream handlers unless they're shown to solve a problem

0.13.0 #

  • Remove call operator / StreamTransformer entirely
  • Important bug fix: Errors thrown within any Stream or Operator will now be properly sent to the StreamSubscription.
  • Improve overall handling of errors throughout the library to ensure they're handled correctly

0.12.0 #

  • Added doOn* operators in place of call.
  • Added DoStreamTransformer as a replacement for CallStreamTransformer
  • Deprecated call and CallStreamTransformer. Please use the appropriate doOnX operator / transformer.
  • Added distinctUnique. Emits items if they've never been emitted before. Same as to Rx#distinct.

0.11.0 #

  • !!!Breaking Api Change!!!
    • Observable.groupBy has been removed in order to be compatible with the next version of the Stream class in Dart 1.24.0, which includes this method

0.10.2 #

  • BugFix: The new Subject implementation no longer causes infinite loops when used with ng2 async pipes.

0.10.1 #

  • Documentation fixes

0.10.0 #

  • Api Changes
    • Observable
      • Remove all deprecated methods, including:
        • observable factory -- replaced by the constructor new Observable()
        • combineLatest -- replaced by Strong-Mode versions combineLatest2 - combineLatest9
        • zip -- replaced by Strong-Mode versions zip2 - zip9
      • Support asObservable conversion from Future-returning methods. e.g. new Observable.fromIterable([1, 2]).first.asObservable()
      • Max and Min now return a Future of the Max or Min value, rather than a stream of increasing or decreasing values.
      • Add cast operator
      • Remove ConcatMapStreamTransformer -- functionality is already supported by asyncExpand. Keep the concatMap method as an alias.
    • Subjects
      • BehaviourSubject has been renamed to BehaviorSubject
      • The subjects have been rewritten and include far more testing
      • In keeping with the Rx idea of Subjects, they are broadcast-only
  • Documentation -- extensive documentation has been added to the library with explanations and examples for each Future, Stream & Transformer.
    • Docs detailing the differences between RxDart and raw Observables.

0.9.0 #

  • Api Changes:
    • Convert all StreamTransformer factories to proper classes
      • Ensure these classes can be re-used multiple times
    • Retry has moved from an operator to a constructor. This is to ensure the stream can be properly re-constructed every time in the correct way.
    • Streams now properly enforce the single-subscription contract
  • Include example Flutter app. To run it, please follow the instructions in the README.

0.8.3+1 #

  • rename examples map to example

0.8.3 #

  • added concatWith, zipWith, mergeWith, skipUntil
  • cleanup of the examples folder
  • cleanup of examples code
  • added fibonacci example
  • added search GitHub example

0.8.2+1 #

  • moved repo into ReactiveX
  • update readme badges accordingly

0.8.2 #

  • added materialize/dematerialize
  • added range (factory)
  • added timer (factory)
  • added timestamp
  • added concatMap

0.8.1 #

  • added never constructor
  • added error constructor
  • moved code coverage to codecov.io

0.8.0 #

  • BREAKING: tap is replaced by call(onData)
  • added call, which can take any combination of the following event methods: onCancel, onData, onDone, onError, onListen, onPause, onResume

0.7.1+1 #

  • improved the README file

0.7.1 #

  • added ignoreElements
  • added onErrorResumeNext
  • added onErrorReturn
  • added switchIfEmpty
  • added empty factory constructor

0.7.0 #

  • BREAKING: rename combineXXXLatest and zipXXX to a numbered equivalent, for example: combineThreeLatest becomes combineLatest3
  • internal refactoring, expose streams/stream transformers as a separate library

0.6.3+4 #

  • changed ofType to use TypeToken

0.6.3+3 #

  • added ofType

0.6.3+2 #

  • added defaultIfEmpty

0.6.3+1 #

  • changed concat, old concat is now concatEager, new concat behaves as expected

0.6.3 #

  • Added withLatestFrom
  • Added defer ctr (both thanks to brianegan)

0.6.2 #

  • Added just (thanks to brianegan)
  • Added groupBy
  • Added amb

0.6.1 #

  • Added concat

0.6.0 #

  • BREAKING: startWith now takes just one parameter instead of an Iterable. To add multiple starting events, please use startWithMany.
  • Added BehaviourSubject and ReplaySubject. These implement StreamController.
  • BehaviourSubject will notify the last added event upon listening.
  • ReplaySubject will notify all past events upon listening.
  • DEPRECATED: zip and combineLatest, use their strong-type-friendly alternatives instead (available as static methods on the Observable class, i.e. Observable.combineThreeLatest, Observable.zipFour, ...)

0.5.1 #

  • Added documentation (thanks to dustinlessard-wf)
  • Fix tests breaking due to deprecation of expectAsync
  • Fix tests to satisfy strong mode requirements

0.5.0 #

  • As of this version, rxdart depends on SDK v1.21.0, to support the newly added generic method type syntax

← Metadata

2650
likes
0
pub points
100%
popularity

Publisher

verified publisherfluttercommunity.dev

Metadata

RxDart is an implementation of the popular reactiveX api for asynchronous programming, leveraging the native Dart Streams api.

Repository (GitHub)
View/report issues

License

unknown (license)

More

Packages that depend on rxdart

Back