AudioContext extension type

The AudioContext interface represents an audio-processing graph built from audio modules linked together, each represented by an AudioNode.

An audio context controls both the creation of the nodes it contains and the execution of the audio processing, or decoding. You need to create an AudioContext before you do anything else, as everything happens inside a context. It's recommended to create one AudioContext and reuse it instead of initializing a new one each time, and it's OK to use a single AudioContext for several different audio sources and pipeline concurrently.

on

• JSObject

Implemented types

• BaseAudioContext
• JSObject

Available extensions

• JSAnyOperatorExtension
• JSAnyUtilityExtension
• JSObjectUnsafeUtilExtension
• NullableUndefineableJSAnyExtension

Constructors

AudioContext([AudioContextOptions contextOptions])

factory

Properties

audioWorklet → AudioWorklet

no setter, inherited

baseLatency → num

no setter

currentTime → num

no setter, inherited

destination → AudioDestinationNode

no setter, inherited

hashCode → int

The hash code for this object.

no setter, inherited

isDefinedAndNotNull → bool

Available on JSAny?, provided by the NullableUndefineableJSAnyExtension extension

no setter

isNull → bool

Available on JSAny?, provided by the NullableUndefineableJSAnyExtension extension

Whether this value corresponds to JavaScript null.

no setter

isTruthy → JSBoolean

Available on JSAny?, provided by the JSAnyOperatorExtension extension

The result of !!this in JavaScript.

no setter

isUndefined → bool

Available on JSAny?, provided by the NullableUndefineableJSAnyExtension extension

Whether this value corresponds to JavaScript undefined.

no setter

isUndefinedOrNull → bool

Available on JSAny?, provided by the NullableUndefineableJSAnyExtension extension

no setter

listener → AudioListener

no setter, inherited

not → JSBoolean

Available on JSAny?, provided by the JSAnyOperatorExtension extension

The result of !this in JavaScript.

no setter

onsinkchange ↔ EventHandler?

getter/setter pair

onstatechange ↔ EventHandler?

getter/setter pair, inherited

outputLatency → num

no setter

renderCapacity → AudioRenderCapacity

no setter

renderQuantumSize → int

no setter, inherited

runtimeType → Type

A representation of the runtime type of the object.

no setter, inherited

sampleRate → num

no setter, inherited

sinkId → JSAny

no setter

state → AudioContextState

no setter, inherited

Methods

add(JSAny? any) → JSAny

Available on JSAny?, provided by the JSAnyOperatorExtension extension

The result of this + any in JavaScript.

addEventListener(String type, EventListener? callback, [JSAny options]) → void

The addEventListener() method of the EventTarget interface sets up a function that will be called whenever the specified event is delivered to the target.

inherited

and(JSAny? any) → JSAny?

Available on JSAny?, provided by the JSAnyOperatorExtension extension

The result of this && any in JavaScript.

callMethod<R extends JSAny?>(JSAny method, [JSAny? arg1, JSAny? arg2, JSAny? arg3, JSAny? arg4]) → R

Available on JSObject, provided by the JSObjectUnsafeUtilExtension extension

Calls method on this JSObject with up to four arguments.

callMethodVarArgs<R extends JSAny?>(JSAny method, [List<JSAny?>? arguments]) → R

Available on JSObject, provided by the JSObjectUnsafeUtilExtension extension

Calls method on this JSObject with a variable number of arguments.

close() → JSPromise<JSAny?>

The close() method of the AudioContext Interface closes the audio context, releasing any system audio resources that it uses.

createAnalyser() → AnalyserNode

The createAnalyser() method of the BaseAudioContext interface creates an AnalyserNode, which can be used to expose audio time and frequency data and create data visualizations.

inherited

createBiquadFilter() → BiquadFilterNode

The createBiquadFilter() method of the BaseAudioContext interface creates a BiquadFilterNode, which represents a second order filter configurable as several different common filter types.

inherited

createBuffer(int numberOfChannels, int length, num sampleRate) → AudioBuffer

The createBuffer() method of the BaseAudioContext Interface is used to create a new, empty AudioBuffer object, which can then be populated by data, and played via an AudioBufferSourceNode

inherited

createBufferSource() → AudioBufferSourceNode

The createBufferSource() method of the BaseAudioContext Interface is used to create a new AudioBufferSourceNode, which can be used to play audio data contained within an AudioBuffer object. AudioBuffers are created using BaseAudioContext.createBuffer or returned by BaseAudioContext.decodeAudioData when it successfully decodes an audio track.

inherited

createChannelMerger([int numberOfInputs]) → ChannelMergerNode

The createChannelMerger() method of the BaseAudioContext interface creates a ChannelMergerNode, which combines channels from multiple audio streams into a single audio stream.

inherited

createChannelSplitter([int numberOfOutputs]) → ChannelSplitterNode

The createChannelSplitter() method of the BaseAudioContext Interface is used to create a ChannelSplitterNode, which is used to access the individual channels of an audio stream and process them separately.

inherited

createConstantSource() → ConstantSourceNode

The createConstantSource() property of the BaseAudioContext interface creates a ConstantSourceNode object, which is an audio source that continuously outputs a monaural (one-channel) sound signal whose samples all have the same value.

inherited

createConvolver() → ConvolverNode

The createConvolver() method of the BaseAudioContext interface creates a ConvolverNode, which is commonly used to apply reverb effects to your audio. See the spec definition of Convolution for more information.

inherited

createDelay([num maxDelayTime]) → DelayNode

The createDelay() method of the BaseAudioContext Interface is used to create a DelayNode, which is used to delay the incoming audio signal by a certain amount of time.

inherited

createDynamicsCompressor() → DynamicsCompressorNode

The createDynamicsCompressor() method of the BaseAudioContext Interface is used to create a DynamicsCompressorNode, which can be used to apply compression to an audio signal.

inherited

createGain() → GainNode

The createGain() method of the BaseAudioContext interface creates a GainNode, which can be used to control the overall gain (or volume) of the audio graph.

inherited

createIIRFilter(JSArray<JSNumber> feedforward, JSArray<JSNumber> feedback) → IIRFilterNode

The createIIRFilter() method of the BaseAudioContext interface creates an IIRFilterNode, which represents a general infinite impulse response (IIR) filter which can be configured to serve as various types of filter.

inherited

createMediaElementSource(HTMLMediaElement mediaElement) → MediaElementAudioSourceNode

The createMediaElementSource() method of the AudioContext Interface is used to create a new MediaElementAudioSourceNode object, given an existing HTML audio or video element, the audio from which can then be played and manipulated.

createMediaStreamDestination() → MediaStreamAudioDestinationNode

The createMediaStreamDestination() method of the AudioContext Interface is used to create a new MediaStreamAudioDestinationNode object associated with a WebRTC MediaStream representing an audio stream, which may be stored in a local file or sent to another computer.

createMediaStreamSource(MediaStream mediaStream) → MediaStreamAudioSourceNode

The createMediaStreamSource() method of the AudioContext Interface is used to create a new MediaStreamAudioSourceNode object, given a media stream (say, from a MediaDevices.getUserMedia instance), the audio from which can then be played and manipulated.

createMediaStreamTrackSource(MediaStreamTrack mediaStreamTrack) → MediaStreamTrackAudioSourceNode

The createMediaStreamTrackSource() method of the AudioContext interface creates and returns a MediaStreamTrackAudioSourceNode which represents an audio source whose data comes from the specified MediaStreamTrack.

createOscillator() → OscillatorNode

The createOscillator() method of the BaseAudioContext interface creates an OscillatorNode, a source representing a periodic waveform. It basically generates a constant tone.

inherited

createPanner() → PannerNode

The createPanner() method of the BaseAudioContext Interface is used to create a new PannerNode, which is used to spatialize an incoming audio stream in 3D space.

inherited

createPeriodicWave(JSArray<JSNumber> real, JSArray<JSNumber> imag, [PeriodicWaveConstraints constraints]) → PeriodicWave

The createPeriodicWave() method of the BaseAudioContext Interface is used to create a PeriodicWave, which is used to define a periodic waveform that can be used to shape the output of an OscillatorNode.

inherited

createScriptProcessor([int bufferSize, int numberOfInputChannels, int numberOfOutputChannels]) → ScriptProcessorNode

The createScriptProcessor() method of the BaseAudioContext interface creates a ScriptProcessorNode used for direct audio processing.

inherited

createStereoPanner() → StereoPannerNode

The createStereoPanner() method of the BaseAudioContext interface creates a StereoPannerNode, which can be used to apply stereo panning to an audio source. It positions an incoming audio stream in a stereo image using a low-cost panning algorithm.

inherited

createWaveShaper() → WaveShaperNode

The createWaveShaper() method of the BaseAudioContext interface creates a WaveShaperNode, which represents a non-linear distortion. It is used to apply distortion effects to your audio.

inherited

dartify() → Object?

Available on JSAny?, provided by the JSAnyUtilityExtension extension

Converts a JavaScript value to the Dart equivalent if possible.

decodeAudioData(JSArrayBuffer audioData, [DecodeSuccessCallback? successCallback, DecodeErrorCallback? errorCallback]) → JSPromise<AudioBuffer>

The decodeAudioData() method of the BaseAudioContext Interface is used to asynchronously decode audio file data contained in an ArrayBuffer that is loaded from fetch, XMLHttpRequest, or FileReader. The decoded AudioBuffer is resampled to the AudioContext's sampling rate, then passed to a callback or promise.

inherited

delete(JSAny property) → JSBoolean

Available on JSObject, provided by the JSObjectUnsafeUtilExtension extension

Deletes the property with key property from this JSObject.

dispatchEvent(Event event) → bool

The dispatchEvent() method of the EventTarget sends an Event to the object, (synchronously) invoking the affected event listeners in the appropriate order. The normal event processing rules (including the capturing and optional bubbling phase) also apply to events dispatched manually with dispatchEvent().

inherited

divide(JSAny? any) → JSAny

Available on JSAny?, provided by the JSAnyOperatorExtension extension

The result of this / any in JavaScript.

equals(JSAny? any) → JSBoolean

Available on JSAny?, provided by the JSAnyOperatorExtension extension

The result of this == any in JavaScript.

exponentiate(JSAny? any) → JSAny

Available on JSAny?, provided by the JSAnyOperatorExtension extension

The result of this ** any in JavaScript.

getOutputTimestamp() → AudioTimestamp

The getOutputTimestamp() method of the AudioContext interface returns a new AudioTimestamp object containing two audio timestamp values relating to the current audio context.

getProperty<R extends JSAny?>(JSAny property) → R

Available on JSObject, provided by the JSObjectUnsafeUtilExtension extension

The value of the property key property of this JSObject.

greaterThan(JSAny? any) → JSBoolean

Available on JSAny?, provided by the JSAnyOperatorExtension extension

The result of this > any in JavaScript.

greaterThanOrEqualTo(JSAny? any) → JSBoolean

Available on JSAny?, provided by the JSAnyOperatorExtension extension

The result of this >= any in JavaScript.

has(String property) → bool

Available on JSObject, provided by the JSObjectUnsafeUtilExtension extension

Shorthand helper for hasProperty to check whether this JSObject contains the property key property, but takes and returns a Dart value.

hasProperty(JSAny property) → JSBoolean

Available on JSObject, provided by the JSObjectUnsafeUtilExtension extension

Whether or not this JSObject contains the property key property.

instanceof(JSFunction constructor) → bool

Available on JSAny?, provided by the JSAnyUtilityExtension extension

Whether this JSAny? is an instanceof constructor.

instanceOfString(String constructorName) → bool

Available on JSAny?, provided by the JSAnyUtilityExtension extension

Whether this JSAny? is an instanceof the constructor that is defined by constructorName, which is looked up in the globalContext.

isA<T extends JSAny?>() → bool

Available on JSAny?, provided by the JSAnyUtilityExtension extension

Whether this JSAny? is an instance of the JavaScript type that is declared by T.

lessThan(JSAny? any) → JSBoolean

Available on JSAny?, provided by the JSAnyOperatorExtension extension

The result of this < any in JavaScript.

lessThanOrEqualTo(JSAny? any) → JSBoolean

Available on JSAny?, provided by the JSAnyOperatorExtension extension

The result of this <= any in JavaScript.

modulo(JSAny? any) → JSAny

Available on JSAny?, provided by the JSAnyOperatorExtension extension

The result of this % any in JavaScript.

multiply(JSAny? any) → JSAny

Available on JSAny?, provided by the JSAnyOperatorExtension extension

The result of this * any in JavaScript.

noSuchMethod(Invocation invocation) → dynamic

Invoked when a nonexistent method or property is accessed.

inherited

notEquals(JSAny? any) → JSBoolean

Available on JSAny?, provided by the JSAnyOperatorExtension extension

The result of this != any in JavaScript.

or(JSAny? any) → JSAny?

Available on JSAny?, provided by the JSAnyOperatorExtension extension

The result of this || any in JavaScript.

removeEventListener(String type, EventListener? callback, [JSAny options]) → void

The removeEventListener() method of the EventTarget interface removes an event listener previously registered with EventTarget.addEventListener from the target. The event listener to be removed is identified using a combination of the event type, the event listener function itself, and various optional options that may affect the matching process; see Matching event listeners for removal.

inherited

resume() → JSPromise<JSAny?>

The resume() method of the AudioContext interface resumes the progression of time in an audio context that has previously been suspended.

setProperty(JSAny property, JSAny? value) → void

Available on JSObject, provided by the JSObjectUnsafeUtilExtension extension

Write the value of property key property of this JSObject.

setSinkId(JSAny sinkId) → JSPromise<JSAny?>

The setSinkId() method of the AudioContext interface sets the output audio device for the AudioContext. If a sink ID is not explicitly set, the default system audio output device will be used.

strictEquals(JSAny? any) → JSBoolean

Available on JSAny?, provided by the JSAnyOperatorExtension extension

The result of this === any in JavaScript.

strictNotEquals(JSAny? any) → JSBoolean

Available on JSAny?, provided by the JSAnyOperatorExtension extension

The result of this !== any in JavaScript.

subtract(JSAny? any) → JSAny

Available on JSAny?, provided by the JSAnyOperatorExtension extension

The result of this - any in JavaScript.

suspend() → JSPromise<JSAny?>

The suspend() method of the AudioContext Interface suspends the progression of time in the audio context, temporarily halting audio hardware access and reducing CPU/battery usage in the process — this is useful if you want an application to power down the audio hardware when it will not be using an audio context for a while.

toString() → String

A string representation of this object.

inherited

typeofEquals(String typeString) → bool

Available on JSAny?, provided by the JSAnyUtilityExtension extension

Whether the result of typeof on this JSAny? is typeString.

unsignedRightShift(JSAny? any) → JSNumber

Available on JSAny?, provided by the JSAnyOperatorExtension extension

The result of this >>> any in JavaScript.

Operators

operator ==(Object other) → bool

The equality operator.

inherited

operator [](String property) → JSAny?

Available on JSObject, provided by the JSObjectUnsafeUtilExtension extension

Shorthand helper for getProperty to get the value of the property key property of this JSObject, but takes and returns a Dart value.

operator []=(String property, JSAny? value) → void

Available on JSObject, provided by the JSObjectUnsafeUtilExtension extension

Shorthand helper for setProperty to write the value of the property key property of this JSObject, but takes a Dart value.